Showing 1 - 10 of 14, total 2 pages [First] [Previous] [ Next] [ Last] |
| |
1 | | | din black and phosphated hydraulic tube with high precision
Specification: Precision Seamless Pipe with perfect surface
Detail: Synopsis of Process Routing:DIN highly accurate, cold drawn and bright seamless steel tube is used as the tube to be phosphated. The phosphated is realized with the imported chemical fluid to form a black film. The antirust oi...
|
|
2 | | | cylinder pipe
Specification: Cylinder Pipe with 60 to 406mm OD and 5 to 25mm WT
Detail: Outside diameter: 60 to 406mm (2 to 16 inches) Wall thickness: 5 to 25mm (1/4 to 1 inch) Length: 5 to 12 meters (16 to 40ft) Honed are available Standard: DIN EN 10083 Steel grade: 34CrMo4, 42CrMo4, SAE1026 and 25Mn ...
|
|
3 | | | special shape tube
Specification: Square Tube
Detail: Heat-treatment: stress relieved or cold-finished Standards: ASTM A500 and GB/T 3094 Continuous stenciling as per requirement Rust prevention treatment and oiled Plastic plugs in both ends Hexagonal or square bundles ...
|
|
4 | | | extruded finned tubes
Specification: Extruded Finned Tubes with 0.25 to 0.45mm Fin Thickness
Detail: Base tube of double extruded fin tube can be SS, CS, corrosion resistant steel, copper/copper alloys and Ti/Ti alloys Customized specifications are welcome Specifications: Finned tube: (OD) 25 to 88mm Fin thickness: 0.2...
|
|
5 | | | fireproof board
Specification: Fireproof board 1,220 x 2,440, 915 x 1,800 and 900 x 2,400mm
Detail: Raw materials: MgO, Mgcl2 and alkali glass fiber net Fire-resistant Features: Sizes: 1,220 x 2,440, 915 x 1,800 and 900 x 2,400mm Thickness: 3 to 20mm Customized sizes are accepted 100% asbestos-free Specification:...
|
|
6 | | | pre-painted alu-zinc(zincalume or galvalume) coils
Specification: Alu-Zinc Coil
Detail: Produced by dipping cold rolled coils in the molten Aluzinc bath Aluzinc ingots are made with the composition of 55% aluminum, 43.5% zinc and 1.5% Si Aluzinc has better corrosion resistance in co***rison with normal galvan...
|
|
7 | | | line pipe
Specification: API 5L ,API 5CT
Detail: Standard: API SPEC 5L Application: used for conveying gas, water and petroleum of both the oil and natural gas industries Grade B, X42, X46, X52, X56, X60, X65, X70 and X80 Standard: API SPEC 5CT Application: seamless ste...
|
|
8 | | | galvanized steel coil
Specification: GI from 0.2~2.5mm
Detail: Hot dip galvanized steel coil Thickness: 0.14 to 4.5mm Width: 20 to 1500mm Zinc coating: 50 to 275g/mm2 Tensile strength: 270 to 500n/mm2 Quality standard of galvanized steel coil: JIS G3002 GB/T251B Grade of galva...
|
|
9 | | | ceiling grids
Specification: T42,T38 and T32
Detail: Main tee: 35 x 15 x 3600mm/3660mm, Pcs/100m2: 22.5pcs Long cross tee: 35 x 15 x 1200mm/1220mm, Pcs/100m2: 135pcs Short cross tee: 35 x 15 x 600mm/610mm, Pcs/100m2: 135pcs Wall angle: 23 x 19 x 3000mm/3050mm, pcs/100m2: 2...
|
|
10 | | | mechanical seamless steel tube
Specification: 6~127mm OD
Detail: Specifications: 1) Size range: 6- 127mm OD x 0.89 - 16mm WT 2) Heat treatment: annealed, bright annealed, stress relieved, normalized, spheroidize annealed, or cold finished 3) Standards: ASTM A519, JIS G3441, JIS G344...
|
|
Home
